Other Alloy Wire Mesh – Optional and Customizable Wire Cloth

Our company can supply various wire mesh cloths woven from special alloys. Apart from L605, tantalum woven wire mesh, other alloy wire meshes are ready to satisfy your specific applications and environments. If there is no your wanted material, just contact us for more information, we will customize for your specific requirements.
Carpenter® 20Cb-3 Woven Wire Mesh
This alloy wire mesh provides outstanding resistance to stress-corrosion cracking, crevice corrosion, intergranular attack and pitting. Besides, it has strong chlorides and sulfuric, phosphoric and nitric acid resistance performance to be used in pharmaceutical production, pickling tanks, synthetic rubber, gas scrubbers, pumps and other industries.
Elements | Ni | Fe | Cr | Cu | Mo |
---|---|---|---|---|---|
Contents | 35 | 37 | 20 | 3.5 | 2.5 |
Other physical & chemical properties
- Density: 0.291 lbs/in3
- Tensile strength: 110 Kpsi*
- Elongation: 30%*
- Melt: 2600 °F
- Max. Operating temperature: 1900–2100 °F
* Tensile strength and elongation are for annealed 0.012" wire diameter. Other diameters will varies.
Carpenter 20 is a registered trademark name of Carpenter Technology Corp.
Columbium (Niobium) Woven Wire Mesh
The columbium (Niobium) woven wire mesh is a rare metal mesh with very stable chemical element. In various inorganic acid making equipment, it can replace the stainless steel mesh for increased service life by several times.
In the chemical, electronic, electrical and other industries, the niobium woven wire mesh can replace the precious metal platinum to greatly reduce the cost.
The Niobium woven wire mesh can also used in tanks, towers, pipes and valves for petrochemical heat exchangers, heaters, concentrators and reactors.
In addition, the mesh has excellent high temperature resistance performance, so it is also commonly used in high temperature vacuum furnaces.
Element | C | Cb | H | Hf | N | O | Ta | Ti | W | Zr |
---|---|---|---|---|---|---|---|---|---|---|
Content | 0.015 | Rem. | 0.0015 | 9.0–11.0 | 0.01 | 0.02 | 0.50 | 0.7–1.3 | 0.5 | 0.7 |
Other physical & chemical properties
- Melting point: 2468 °C
- Boiling point: 5127 °C
Haynes 214 Woven Wire Mesh
It is a nickel based alloy with excellent oxidation and corrosion resistance performance in high temperature. It can also resist to and chlorine. The welding performance, strength and abrasion resistance performance are also outstanding in rare metal wire mesh.
Haynes 214 wire mesh can be made into filter discs and heating elements. Besides, it is also widely used in ceramics, chemicals, electronic, aerospace, metallurgy industries.
Element | Ni | Cr | Al | Fe | Mn | Si | Zr | C | Y | B |
---|---|---|---|---|---|---|---|---|---|---|
Content | 75 | 16 | 4.5 | 3 | Max. 0.5 | Max. 0.2 | Max.0.1 | 0.05 | 0.01 | Max. 0.01 |
Incoloy Alloy 800 Woven Wire Mesh
It is a nickel-iron-chromium alloy wire mesh with good strength. The oxidation and carburization resistance are excellent in high temperature atmosphere up to 1100 °F. It has stable performance in many aqueous environments. Besides, the low carbon content of Incoloy alloy 800 wire mesh helps to prevent sensitization and consequent intergranular corrosion of weld heat-affected zones. This type of woven wire cloth is widely used for flue-gas scrubbers and for handling phosphoric and sulfuric acids.
Element | Ni | Cr | C | Fe |
Content | 32.5 | 21 | Ma. 10 | Rem. |
Other physical & chemical properties
- Density: 0.288 lbs/in3
- Tensile strength: 110 Kpsi*
- Elongation: 30%*
- Melt point: 2500 °F
- Max. Operating Temperature: 1900 °F
* Tensile strength and elongation are for annealed 0.012" wire diameter. Other diameters will varies.
Kanthal-D® Woven Wire Mesh
Kanthal-D® is high temperature resistance up to 2370 °F and it has stable performance and corrosion resistance in high temperature conditions. Besides, the sulfur and carburizing resistance performance are also outstanding.
Element | Cr | Al | Fe |
Content | 22 | 4.8 | Rem. |
Other physical & chemical properties
- Density: 0.262 lbs/in3
- Tensile strength: 115 Kpsi*
- Elongation: 20%*
- Melt point: 2730 °F
- Max. Operating Temperature: 2370 °F
* Tensile strength and elongation are for annealed 0.012" wire diameter. Other diameters will varies.
Kanthal-D is a registered trademark name of Carpenter Technology Corp.
Tungsten Wire Cloth
Tungsten Wire Cloth has the highest melting point and tensile strength among all alloy woven wire mesh at extreme temperatures. It is widely used in medical devices, electrodes, vacuum heating elements and electronic applications.
Chemical Compositions of Tungsten Wire Cloth (%) | ||
---|---|---|
Purity | Impurity content | |
≥ 99.95 | Single element | Total element |
≤ 0.01 | ≤ 0.05 |
Other physical & chemical properties
- Density: 0.697 lbs/in3
- Tensile strength: 330 Kpsi*
- Elongation: 1%*
- Melt point: 6170 °F
- Max. Operating Temperature: 2370 °F
* Tensile strength and elongation are for annealed 0.012" wire diameter. Other diameters will varies.
Inquiry for Our Product
Boegger Industech Limited
E-mail: rare@woven-wire.com
When you contact us, please provide your detail requirements. That will help us give you a valid quotation.